||High Voltage Motor Control Demonstration Platform
by AnalogDevice - 2013-09-26 13:43 - 4,560 views
This video showcases the advanced motor control capabilities of
the new ADSP-CM408 mixed-signal processor control board with
integrated 240 MHZ floating point ARM® Cortex -- M4 core in
conjunction with ADI's High Voltage power board.
||ADSP-CM40x Series of Mixed-Signal Processors
by AnalogDevice - 2013-09-26 13:43 - 4,856 views
This video highlights the advanced features and functionality of the
new ADSP-CM40x series of mixed-signal processors featuring an
integrated 240 MHZ floating point ARM® Cortex -- M4 core and
best-in-class dual ADC performance.
||4-Channel AFE for Wide Dynamic Range Signal Conditioning
by AnalogDevice - 2013-09-11 11:13 - 4,449 views
This reference circuit provides programmable gain, high CMR, and
high input impedance. It maintains very good performance and has
an easy configuration for signals w/ varying amplitudes. It accepts
full-scale input signals from a few mV up to ±10V.
||High Accuracy Impedance Measurement
by AnalogDevice - 2013-09-11 11:13 - 4,475 views
Using a high precision impedance converter system that combines
an on-chip programmable frequency generator with a 12-bit, 1
MSPS (or 250 kSPS) ADC, this ref circuit yields accurate
impedance measurements extending from low ohm to several
||Dual Channel Colorimeter with Programmable Gain Amplifiers
by AnalogDevice - 2013-09-11 11:12 - 4,154 views
This reference circuit can be used in chemical analysis and
environmental monitoring instruments to measure concentrations
and characterize materials through absorption spectroscopy. It has
a modulated light source TX and a synchronous detector RX.
||Carbon Monoxide Toxic Gas Detector
by AnalogDevice - 2013-09-11 11:12 - 3,980 views
This reference circuit is a single-supply, low power, battery
operated, portable gas detector using an electrochemical sensor.
Total power consumption for the circuit is approximately 110 μA (no
gas detected) and 460 μA (2000 ppm CO detected).
||Signal Chain Designer: A New Way to Design Online
by AnalogDevice - 2013-09-11 11:11 - 4,065 views
Signal Chain Designer™ is an advanced selection and design
environment that enables custom design creation and direct
interactive access to more than 200 tested application circuits and
verified product combinations.
||Current Monitoring with High Common Mode Voltages
by AnalogDevice - 2013-09-11 11:11 - 4,110 views
This reference circuit monitors current in systems with high positive
common-mode dc voltages of up to 500 V with less than 0.2%
error, and is powered by a single 5V supply. Galvanic isolation is
provided by a quad channel digital isolator.
||Simulation Tools for Synthesis and Clock Generation
by AnalogDevice - 2013-09-11 11:10 - 3,931 views
This video provides an overview of Analog Devices tools for
selecting, using, and configuring clocks and frequency synthesis
devices such as direct digital synthesis (DDS), phase-locked loops
(PLL), and clock distributors.
||Isolated, Industrial Voltage Level Data Acquisition System
by AnalogDevice - 2013-09-11 11:09 - 3,435 views
This reference circuit is a highly integrated 16-bit, 250 kSPS,
8-channel data acquisition system that can digitize ±10 V industrial
level signals. It provides 2500 V rms isolation between the
measurement circuit and the host controller.