|Total : 464 ( 5/47 Pages)
||Total system power for battery operated apps- TPS65290 PMU
by ARROW - 2013-09-12 15:54 - 16,712 views
Are you working on a single cell battery operated system? TI
System and Applications manager, Nat Natarajan discusses how to
use the TPS65290 ultra low power PMU to power multiple rails
within your design. Nat Natarajan - Systems and Applications manager
||Safely Drive High Brightness LEDs with LM3466
by ARROW - 2013-09-12 15:53 - 25,345 views
Learn how to safely drive high brightness LEDs in parallel
configurations with TI's LM3466 Multi-String LED Current Balancer
for use with constant current power supplies
||Engineer It: What is a multiplying DAC (MDAC)?
by ARROW - 2013-08-23 17:22 - 7,233 views
Learn what a multiplying DAC (MDAC) is and how it works. Toward
the end of the video, you'll get three tips to keep in mind when
designing with an MDAC
||Engineer It: When to use an analog temp sensor vs a thermistor
by ARROW - 2013-08-23 17:22 - 7,501 views
Learn how analog temperature sensors favorably compare with
NTC thermistors when interfacing to an analog-to-digital converter.
We'll compare the output voltage to temperature curves for both
devices, provide a supply current comparison, and explain the
importance of output impedance.
||Engineer It: How to terminate an unused op amp
by ARROW - 2013-08-23 17:21 - 4,504 views
Find out how to properly terminate an unused op amp, the benefits
of doing so, commonly used circuit limitations, and how to select a
proper configuration from senior applications field engineer, Todd Toporski.
||Engineer It: How to measure additive jitter in fanout buffer
by ARROW - 2013-08-23 17:21 - 3,875 views
Learn how to properly measure residual noise of clock fanout
buffers so as not to degrade system performance in high precision
applications from Jim Catt, manager of TI's clocking application group.
||How to design a power system for harsh environments
by ARROW - 2013-08-23 17:20 - 3,966 views
Component selection in a PCB design is critical when designing a
power system for harsh environments. Learn how to properly
design a power system for harsh environments from senior
applications engineer, Ramesh Khanna.
||How to simplify high voltage current measurements
by ARROW - 2013-08-23 17:20 - 3,963 views
Learn how to simplify high voltage current measurements from
applications engineer, Chuck Sins, and current sense expert, Paul Grohe.
||LT3081 1.5A Single Resistor Rugged Linear Regulator with Monitors - Video Product Brief
by ARROW - 2013-08-17 11:54 - 4,586 views
The LT3081 is a 1.5A low dropout linear regulator designed for
rugged industrial applications with monitoring and protection
features. Key features of the device are the extended safe
operating area, wide input and output voltage ranges, output
current monitor, temperature monitor and programmable current
limit. The LT3081 uses a current source reference for single
resistor output voltage settings and output adjustable down to '0'
and can be paralleled for higher output current or heat spreading.
Furthermore the current from the device's current monitor can be
summed with the set current for line-drop compensation. The
device withstands reverse input and reverse output-to-input
voltages without reverse current flow. This architecture features a
high-accuracy current-source reference and offers low noise, wide
input & output voltage, and good PSRR.
||Igniting opportunities in diverse industries with the 4th Gen Intel® Core™ Processor Family
by ARROW - 2013-08-17 11:53 - 4,461 views
The 4th generation Intel® Core™ processor family provides
excellent CPU, graphics, media performance, flexibility, and
enhanced security for connected, managed, and secure intelligent